Total Fire & Safety Blog

Many businesses are choosing clean agents in order to safeguard their assets- data stored on computers, expensive electronic equipment, and anything that could be destroyed with liquid, especially certain chemicals sometimes found in commercial fire suppression systems.  Clean agents are a new kind of suppression system for the 21^st century, because they are computer-friendly. These clean agent systems release gaseous chemicals instead of liquid, which prevents electronics from being damaged by a fire suppression system. Clean agent systems are therefore preferred in areas like data processing centers, telecommunications facilities, medical diagnostic rooms, laboratories, clean rooms, museums and art galleries, etc.

Clean agents work the same way a traditional fire extinguishing agent would, by targeting the heat, oxygen supply, or the chain reaction between these components. However, clean agent suppression systems are unique because they target a third component, the availability of fuel. The gases can isolate the source of the fire’s fuel in order to extinguish it. When used properly, clean agents can be just as fast and as effective as water or other extinguishants that would affect electronic equipment.

There are certain dangers that go along with clean agents, however. Since the gas must fill an area in order to achieve its full effect, the pressure and volume of the gas must be carefully regulated. Suffocation is a possibility if people are trapped in a room when a clean agent system is activated. However, alarms are always in place to alert people in plenty of time to evacuate the area. Another potential danger occurs if the gas creates enough pressure to break walls or windows. Suppression system experts can make sure that the system is adjusted so that the pressure in a room will not reach dangerous levels.

In the case of an accidental activation of the suppression system, a traditional sprinkler system can cause thousands of dollars in property damage. Clean agent suppression systems are a way to avoid this risk while still protecting your business from fire.

If you have questions about the best type of suppression system for your needs, Total Fire & Safety is an expert in installing, inspecting and maintaining these systems. Contact us today for an appointment at 630-960-5060.